the altivar 312 drive is designed to make industrial and commercial machines more energy effcient, while at the same time simplifying its integration into a single control system architecture. with the highest overtorque and the only drive with a remote graphic keypad in its class, the altivar 312 drive is ideally suited to the needs of material handling, packaging, food & beverage, pump & fan, and other oem machines. it also comes standard with integrated communications port for modbus and canopen networks, and optional cards for canopen daisy chain, devicenet and profbus dp. altivar ? 312 drive selection guide footnotes [1] integrated c2 emc flter. c1 emc flter available as an option [2] no integrated emc flter. c2 emc flter available as an option [3] integrated c2 emc flter up to 5 hp and c3 emc flter over 5 hp c1 and c2 emc flters available as an option make the most of your energy sm hp kw amps drive reference dimensions (in.) w h d supply voltage: single-phase 208240 v [1] 0.25 0.18 1.5 atv312h018m2 2.83 5.71 5.2 0.5 0.37 3.3 atv312h037m2 2.83 5.71 5.2 0.75 0.55 3.7 atv312h055m2 2.83 5.71 5.59 1 0.75 4.8 atv312h075m2 2.83 5.71 5.59 1.5 1.1 6.9 atv312hu11m2 4.21 5.63 5.98 2 1.5 8 atv312hu15m2 4.21 5.63 5.98 3 2.2 11 atv312hu22m2 5.59 7.24 5.98 supply voltage: three-phase 208240 v [2] 0.25 0.18 1.5 atv312h018m3 2.83 5.71 5.2 0.5 0.37 3.3 atv312h037m3 2.83 5.71 5.2 0.75 0.55 3.7 atv312h055m3 2.83 5.71 5.2 1 0.75 4.8 atv312h075m3 2.83 5.71 5.2 1.5 1.1 6.9 atv312hu11m3 4.13 5.63 5.2 2 1.5 8 atv312hu15m3 4.13 5.63 5.2 3 2.2 11 atv312hu22m3 4.21 5.63 5.98 4 3 13.7 atv312hu30m3 5.59 7.24 5.98 5 4 17.5 atv312hu40m3 5.59 7.24 5.98 7.5 5.5 27.5 atv312hu55m3 7.09 9.13 6.77 10 7.5 33 atv312hu75m3 7.09 9.13 6.77 15 11 54 atv312hd11m3 9.64 12.99 7.56 20 15 66 atv312hd15m3 9.64 12.99 7.56 hp kw amps drive reference dimensions (in.) w h d supply voltage: three-phase 380...500 v [3] 0.5 0.37 1.5 atv312h037n4 4.13 5.63 5.2 0.75 0.55 1.9 atv312h055n4 4.13 5.63 5.2 1 0.75 2.3 atv312h075n4 4.13 5.63 5.2 1.5 1.1 3 atv312hu11n4 4.21 5.63 5.98 2 1.5 4.1 atv312hu15n4 4.21 5.63 5.98 3 2.2 5.5 atv312hu22n4 5.59 7.24 5.98 4 3 7.1 ATV312HU30N4 5.59 7.24 5.98 5 4 9.5 atv312hu40n4 5.59 7.24 5.98 7.5 5.5 14.3 atv312hu55n4 7.09 9.13 6.77 10 7.5 17 atv312hu75n4 7.09 9.13 6.77 15 11 27.7 atv312hd11n4 9.64 12.99 7.56 20 15 33 atv312hd15n4 9.64 12.99 7.56 supply voltage: three-phase 525...600 v [2] 1 0.75 1.7 atv312h075s6 4.21 5.63 5.98 2 1.5 2.7 atv312hu15s6 4.21 5.63 5.98 4 2.2 3.9 atv312hu22s6 5.59 7.24 5.98 5 4 6.1 atv312hu40s6 5.59 7.24 5.98 7.5 5.5 9 atv312hu55s6 7.09 9.13 6.77 10 7.5 11 atv312hu75s6 7.09 9.13 6.77 15 11 17 atv312hd11s6 9.64 12.99 7.56 20 15 22 atv312hd15s6 9.64 12.99 7.56
? 2010 schneider electric all rights reserved january 2010 lh schneider electric automation and control center of excellence 8001 knightdale blvd. knightdale, nc 27545 tel: 919-266-3671 www.schneider-electric.us environmental specifcations operating temperature +14 to +122 f (-10 to +50 c) without derating, up to 140 f (60 c) with derating storage temperature -13 to +158 f (-25 to +70 c) humidity 95% with no condensation or dripping water, conforming to iec 600068-2-3 altitude 3300 ft. (1000 m) without derating 3300-9850 ft. (1000-3000 m) derate output current by 1% for each additional 330 ft. (100 m). limited to 6560 ft. (2000 m) on a single phase or a corner grounded distribution system. enclosure rating ip20 rating with optional conduit kits for ul type 1 vibration resistance conforming to iec 60068-2-6: 1.5 mm peak to peak from 3 hz to 13 hz, 1 gn from 13 to 150 hz shock resistance 15 gn for 11 ms conforming to iec 60068-2-27 communication options protocol reference profbus vw3a31207 canopen daisy chain vw3a31208 devicenet vw3a31209 electrical specifcations input voltage 200 v -15% to 240 v +10% 380 v -15% to 500 v +10% 525 v -15% to 600 v +10% input frequency 50 hz -5% to 60 hz +5% output frequency 0.5 to 500 hz torque/overtorque 170200% of nominal motor torque current (transient) 150% for 60 seconds switching frequency selectable from 2 khz to 16 khz (ranges vary depending on drive) functions 50 preset speeds 16 analogue inputs 3 analogue outputs 1 logic inputs 6 relay outputs 2 motor control profles (asynchronous motors) voltage/frequency sensorless fux vector control quadratic ratio for pumps and fans energy saving speed range 50:1 codes and standards ul, csa, ce, nom, gost and c-tick please contact your local schneider electric representative for nema type 1 kits, din rail mount kits, and any other additional accessories. document number 8800ho0901r01/10
|
